repeat">
Harshil Industries
Harshil Industries
G.I.D.C, Sarigam, Valsad, Gujarat
GST No. 24AFAPM8255J1ZB
08046075068 83% Response Rate
Send E-mail

Cryolite Chemicals

Cryolite is an uncommon mineral of very limited natural distribution. Mostly considered a one locality mineral, although there are a few other minor localities, it was only found in large quantities on the west coast of Greenland.

It was used as a solvent of the aluminum rich ore, bauxite, which is a combination of aluminum oxides such as gibbsite, boehmite and diaspore. It is very difficult to remove atoms of aluminum from atoms of oxygen which is necessary in order to produce aluminum metal. Cryolite made an excellent flux to make the process less expensive. Now it is too rare to be used for this purpose and sodium aluminum fluoride is produced artificially to fill the void.

A curious note about cryolite is the fact that it has a low index of refraction close to that of water. This means that if immersed in water, a perfectly clear colorless crystal of cryolite or powdered cryolite will essentially disappear. Even a specimen of cloudy cryolite will become more transparent and its edges will be less distinct, an effect similar to ice in water except that the ice floats.

  

Carving a safe niche for ourselves in the market, we are engaged in manufacturing, supplying, wholesaling and exporting an extensive range of Cryolite Chemicals. Under the supervision of our diligent chemical engineers, these products are formulated with ultra-grade ingredients. To ensure their quality, we tested these chemicals on varied parameters. The offered products are demanded by the clients for their quality as per the international standards. Our range encompasses Sodium Cryolite and Potassium Cryolite which are detailed as follows:

 

Request CallBack
  • Sodium Cryolite
  • Sodium Cryolite
  • Sodium Cryolite
  • Sodium Cryolite
  • Sodium Cryolite
  • Sodium Cryolite
  • Sodium Cryolite
Sodium Cryolite
Get Best Quote

Sodium Cryolite

Approx. Price: Rs 60 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity500 Kg
BrandHARSHIL INDUSTRIES
Physical State/FormSolid
GradeTechnical and pure
Usage/ApplicationGrinding wheels,selves foundry,foundry flux
ColorIndustrial
Packaging Size25 Kg bags with inner linear
DimensionPowder
Packaging TypeBags
Physical FormPowder
Chemical FormulaNa3AlF6
Purity98 %
Molecular Weight210
Grade StandardTechnical Grade
CAS Number15096-52-3
Specific Gravity2.95-3.0
Density0.9-1
Boiling PointN/A
SolubilityNot soluble
AppearanceWhite powder
Moisture0.1%
HardnessN/A
Shelf Life3 years
ElectronegativityN/A
PH Value6.5 to 7
Refractive IndexN/A
Melting Point1000 c
Storage ConditionN/A
Assay98%
Chemical CharacteristicsN/A
UN Number3077
Weight25 kg bags
MaterialFine powder
EC Number239-148-8
HS Code28263000
Country of OriginMade in India

Sodium cryolite , sodium aluminum fluoride, sodium fluoaluminate, sodium fluoroaluminate, sodium hexafluoroaluminate, trisodium hexafluoroaluminate, sodium aluminofluoride, aluminum sodium fluoride, kryolith, kryocide, cryolite, ice spar.

(Na3AlF6). Synthetic cryolite is a white crystalline powder manufactured from hydrofluoric acid, sodium carbonate, and aluminium. Synthetic cryolite is used chiefly as a flux in the electrolytic production of aluminum as it effectively lowers down the melting point of alumina. It is used in the glass and enamel industries, in bonded abrasives as a filler, in making salts of sodium and aluminum and porcelaneous glass and in the manufacture of insecticides. Cryolite is a relatively safe fruit and vegetable insecticide. The fluoride ion inhibits many enzymes that contain iron, calcium, and magnesium.

 

sodium cryolite is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.95—3.05g/cm3, melting point about 1025°C, specific heat 1.056j/g°C at 18—100°C. It’s slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800°C will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

 

Features:

Sodium cryolite mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

 

sodium cryolite is used as flux in aluminum smelting, cropper insecticide, flux and whiting agent of enamel glaze. It is also used in the manufacture of milky white glass, aluminum alloy and boiling steel. Its used as ingredient of grinding wheel.

Specifications:

sodium cryolite

Molecular weight: 210.00

Cas No : 13775-53-6

Description: White powder

Assay: 98.5%

Fluorine value as F: 54.28%

Aluminum content as Al: 12.68%

Free HF: 0.02%

Silica as SiO2: 0.01%

Sulphate as SO4: 0.004%

Iron as fe203 :0.01%

Lead as Pb: 0.02%

Packing: In 25kg/50kg plastic woven bag lined with high pressure polyethylene plastic bag.

 


Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),COD
  • Port of Dispatch: Mumbai , Mundra
  • Production Capacity: 200 Metric ton per month
  • Delivery Time: 15 Days
  • Packaging Details: In 25kg/50kg plastic woven bag lined with high pressure polyethylene plastic bag.
Yes! I am Interested
Request CallBack
Synthetic Cryolite
Get Best Quote

Synthetic Cryolite

Approx. Price: Rs 80 / KilogramGet Latest Price
Product Brochure
Product Details:
UsageIndustrial
Physical StatePowder
Grade StandardTechnical Grade
Packaging Size25 kg bags
Packaging TypeHDPE BAGS WITH INNER LINEAR
Usage/ApplicationGrinding wheels, foundry flux , Aluminium smelting
Purity98
PH Value6.5

 

Sodium cryo lite , sodium aluminum fluoride, sodium fluoaluminate, sodium fluoroaluminate, sodium hexafluoroaluminate, trisodium hexafluoroaluminate, sodium aluminofluoride, aluminum sodium fluoride, kryolith, kryocide, cryolite, ice spar.

(Na3AlF6). Synthetic cryolite is a white crystalline powder manufactured from hydrofluoric acid, sodium carbonate, and aluminium. Synthetic cryolite is used chiefly as a flux in the electrolytic production of aluminum as it effectively lowers down the melting point of alumina. It is used in the glass and enamel industries, in bonded abrasives as a filler, in making salts of sodium and aluminum and porcelaneous glass and in the manufacture of insecticides. Cryolite is a relatively safe fruit and vegetable insecticide. The fluoride ion inhibits many enzymes that contain iron, calcium, and magnesium.

 

sodium cryolite is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.95—3.05g/cm3, melting point about 1025°C, specific heat 1.056j/g°C at 18—100°C. It’s slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800°C will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

 

Features:

Sodium cryolite mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

 

sodium cryolite is used as flux in aluminum smelting, cropper insecticide, flux and whiting agent of enamel glaze. It is also used in the manufacture of milky white glass, aluminum alloy and boiling steel. Its used as ingredient of grinding wheel.

Specifications:

sodium cryolite

Molecular weight: 210.00

Cas No : 13775-53-6

Description: White powder

Assay: 98.5%

Fluorine value as F: 54.28%

Aluminum content as Al: 12.68%

Free HF: 0.002%

Silica as SiO2: 0.6%

Sulphate as SO4: 0.004%

Iron as fe203 :0.05%

Lead as Pb: 0.02%

packing : In 25kg/50kg plastic woven bag lined with high pressure polyethylene plastic bag.

 

 


Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
  • Port of Dispatch: Nhavasheva
  • Production Capacity: 200 metric ton
  • Delivery Time: 15 days after purchase order
  • Packaging Details: 25 kg bags
Yes! I am Interested
Request CallBack
Potassium Cryolite
Get Best Quote

Potassium Cryolite

Approx. Price: Rs 75 / KgGet Latest Price
Product Details:
Minimum Order Quantity100 Kg
BrandHarshil Industries
Purity98.5%
GradeIndustrial
Usage/ApplicationGrinding wheel , fluxes
Packaging TypeHDPE bags with inner Linear
Packaging Size25 kg bags
Physical Formfine powder
Chemical FormulaK3AlF6, KAlF6
CAS Number13775-52-5
Molecular Weight258.28
pH Value6.5 TO 7
Specific Gravity3
Density450-600 KG/M3
Melting Point500 TO 550 C
Boiling PointN/A
SolubilityINSOULBLE
AppearanceWhite powder
Moisture0.2 %
HardnessN/A
ElectronegativityN/A
Refractive IndexN/A
Storage ConditionStore in dry and cool place
UN NumberNON-HAZARDOUS
Shelf Life2 years
HS Code28263000

We have gained appreciable heights for manufacturing, supplying, wholesaling and exporting our range of Potassium Cryolite. We are also the manufacturer of foundry flux raw material. Our product is suitable to meet the varied requirements of the clients and acclaimed for its quality. To ensure its quality as per the international standards, it is tested on varied parameters under the surveillance of our diligent professionals. The aluminum fluoride added potassium (potassium aluminum fluoride) or cryolite potassium (potassium cryolite) white or light gray powder. Water-soluble. Toxic! By anhydrous hydrofluoric acid and hydrogen fluoride alumina produced by the reaction of aluminum acid, and then under high temperature and potassium hydroxide reaction, filtration, drying, melting, broken in the system.

Features

· Cost effective

· Ultra-pure

· Fine finishing

 

Uses:

 

· It’s mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

 

Properties:


· The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.95—3.01g/cm3, melting point about 1000°C, specific heat 1.056j/g°C at 18—100°C. It’s slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800°C will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

Specification :

 

PRODUCT : POTASSIUM CRYOLITE

CAS NO : 13775-52-5

FORMULA : K3AIF6

MOL.WT : 258.00

DESCRIPTION : WHITE POWDER

ASSAY : 98.5%

FLOURINE AS F: 44.18%

ALUMINIUM AS AL : 16%

CHLORIDE AS CL : 0.003%

SULPHATE AS SO4 : 0.002%

LEAD AS PB : 0.2%


      Additional Information:
      • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
      • Port of Dispatch: Mumbai
      • Production Capacity: 100 METRIC TON
      • Delivery Time: 15 DAYS
      • Packaging Details: In 25kg/50kg plastic woven bag lined with high pressure polyethylene plastic bag.
      Yes! I am Interested

      Explore more products

      X